Open Line Catalog

Table of Contents

 

Page 12

Drop-in epoxy resin sinks have top mount installation in that the unit sits into a rabbeted cut out in counter top. Single drop-in sinks can be installed without sink supports, & could be used with a variety of top materials. Epoxy resin sinks are matte black, & cast in one piece from modified epoxy resins, compounded & cured to produce maximum physical & chemical properties. All inside corners are coved, & the bottom is pitched to the drain outlet.

Select appropriate size & specify sink with epoxy resin outlet #9688S.

 

Catalog

Number

Nominal Inside Dimensions

(at top of sink)

L(A)

W(B)

H(C)

Sink

Height

O. D.

Center

 

 

 

Location of Drain

 

G

H

Recommended for:

9726D

(w/#9688S Outlet)

14"

(355mm)

10"

(254mm)

6"

(152mm)

6-5/8"

(168mm)

Center

7"

(178mm)

5"

(127mm)

24" or 30" deep tops

(609mm or 761mm)

9730D

(w/#9688S Outlet)

16"

(406mm)

12"

(305mm)

8"

(203mm)

8-5/8"

(219mm)

Center

8"

(203mm)

6"

(152mm)

24" or 30" deep tops

(609mm or 761mm)

ACID RESISTANT POLYPROPYLENE TRAPS

9654 Universal "S" Trap

9652 Universal "P" Trap

UPRIGHT ROD ASSEMBLIES

NOTE: Polypropylene traps shown are size 1-1/2" and will connect directly to standard sink outlets.

9903 Rod Socket

Socket for any 3/4" diameter upright rod with tapered end.

(Requires 1-1/8" diameter hole.)

9924 Aluminum Crossbar Assembly

Assembly consisting of: Two aluminum upright rods, 36" L x 3/4 " diameter; one aluminum crossbar, 39" L x 3/4" diameter; and two aluminum thumbscrew clamps.

 

9910 Aluminum Greenlaw Arm Assembly

Assembly consisting of: One aluminum upright rod, 36" L x 3/4" diameter; one aluminum Greenlaw arm, 20" long x 3/4" diameter; and one aluminum thumbscrew clamp.

 

9918 Aluminum Burette Rod

24" L x 1/2" diameter aluminum rod with adapter to fit into 3/4" opening of rod socket.

Page 12