Page 2

Unit equipped with four drawers, each is 14-1/2” W x 17” D., ID. Drawer box height is 6”.

Top material is 1” Epoxy Resin or Phenolic and must be calculated for the entire casework assembly which includes this unit.  Specify material, provide submittal drawing to illustrate unit placement in casework assembly, and total top material requirement for the assembly.

Unit equipped with one drawer, 14-1/2” W x 17” D., ID. Drawer box height is 6”. Cupboard is equipped with one adjustable shelf.

Top material is 1” Epoxy Resin or Phenolic and must be calculated for the entire casework assembly which includes this unit.  Specify material, provide submittal drawing to illustrate unit placement in casework assembly, and total top material requirement for the assembly.

Unit equipped with two drawers, each is 14-1/2” W x 17” D., ID. Drawer box height is 6”. Cupboard is equipped with two doors and one adjustable shelf

Top material is 1” Epoxy Resin or Phenolic and must be calculated for the entire casework assembly which includes this unit. Specify material, provide submittal drawing to illustrate unit placement in casework assembly, and total top material requirement for the assembly.

Top material is 1” Epoxy Resin or Phenolic and must be calculated for the entire casework assembly which includes this unit. Specify material, provide submittal drawing to illustrate unit placement in casework assembly, and total top material requirement for the assembly.

Make sink selection from page #12, and

fixture selection from page #13 and page #14. These selections MUST accompany your order for this unit, along with sink and faucet locations clearly indicated on the top drawings.

Unit is designed to include provisions for wheelchair space at sink and services. Rinse counter provides a long sloped counter, integral sink, continuous raised edges and coved corners to retain spilled materials and liquids. Top assembly is one piece, fiberglass reinforced polyester, almond in color, with highly durable surface.

Sink assembly has bi-level work surface to accommodate recommended maximum wheelchair height of 34” , and 36” for stand up height. Stand up work surface slopes toward wheelchair work surface, which in turn, slopes toward integral sink. The molded integral sink is sloped from front to back with overall depth not to exceed 6-1/2”. A molded integral ledge is located at rear of sink to accommodate services, and a removable one piece closure panel conceals sink service piping. Unit has one hot and cold water mixing faucet with wrist blade handles. Faucet holes must be drilled at time of installation.

Page 2